Sump Pumps In Delaware, Lewis Center, Powell, OH, and Surrounding Areas
How To Choose A Sump Pump
When choosing a sump pump for your home, it is important to consider the size of the area that needs to be drained, the amount of water that needs to be pumped, and the type of pump that will best suit your needs. There are three main types of sump pumps: submersible, pedestal, and battery-operated.
Submersible pumps are designed to be placed in the water that needs to be pumped, and they are the most common type of sump pump. Pedestal pumps are designed to sit above the water level, and are typically used in areas where there is a potential for the pump to be damaged by flooding. Battery-operated pumps are designed for use in areas where there is no power available, and they are often used as a backup to another type of sump pump.
Top 5 Most Common Sump Pump Issues
1. The Sump Pump Doesn’t Turn On:
If your sump pump doesn’t turn on, the first thing you should check is the power source. If the pump is plugged into an outlet, make sure that the power is turned on and that the circuit breaker hasn’t been tripped. If the pump is battery-operated, check the batteries to make sure they are fresh and have enough power. If none of these solutions are working, you’ll need to contact a professional for sump pump repair.
2. The Sump Pump Doesn’t Seem to be Working:
If your sump pump is running but not pumping water, there could be a few different issues. First, check to make sure that there is no debris clogging up the inlet or outlet of the pump. If there is, remove the debris and try again.
Another possibility is that the float switch, which turns the pump on and off, is stuck in the “off” position. Try gently tapping on the side of the switch to see if it will move. If not, you may need to replace the float switch.
3. The Sump Pump is Making Strange Noises:
If your sump pump is making strange noises, it could be due to a number of different issues. First, check to make sure that there is no debris caught in the impeller (the part of the pump that moves water). If there is, remove the debris and try again.
Another possibility is that the bearings in the pump are worn out and need to be replaced. If you hear a grinding noise, this is usually an indication that the bearings need to be replaced.
4. Water is Leaking from the Sump Pump:
If water is leaking from your sump pump, it is most likely due to a faulty check valve. The check valve prevents water from flowing back into the sump pit, and if it is not working properly, water can leak out of the pump. Check valves can become clogged with debris over time, so it is important to clean them on a regular basis. If the check valve cannot be cleaned, it will need to be replaced.
5. The Sump Pump Keeps Running:
If your sump pump keeps running, it is most likely due to a faulty float switch. The float switch turns the pump on and off, and if it is stuck in the “on” position, the pump will keep running. Try gently tapping on the side of the switch to see if it will move. If not, you may need to replace the float switch.
If your primary pump breaks or you need another type of repair in Delaware, OH, contact our experts at Emergency Plumbing Heating & Air! We have experience with all types of sump pumps and can quickly diagnose and repair any issue you may be having. Give us a call today!