The main reason why drain pipes get clogged is when there is a build-up of grease, soap scum, hair, and other debris. To help keep your drain pipes clear and free-flowing, it’s important to take preventative measures such as regularly cleaning your drains and using a drain cover.
If you do end up with a clogged drain, there are a few things you can do to try and clear it yourself before calling a plumber for drain line service in Lewis Center, OH.
Tips to keep the drain fresh and clean
There’s a series of small holes or slits in the pipes that allow water to pass through but are too small for debris to fit through. When these get blocked, it results in a clogged drain.
Here are some preventive tips that you include in your routine:
- Pour boiling water through the kitchen drain after pouring greasy or oily food particles through the drain. Do not run cold water immediately after pouring warm water because its effectiveness will be neutralized.
- Once a week or once a month, pour baking soda and vinegar into the drain and dump two pans of boiling water to keep the pipe and drain fresh and clean. You might require these products in massive amounts to clean a stiff blockage.
- The best way to keep waste materials out of the drain pipelines is to install filters in the opening of the drainage pipeline. Strainers collect large and medium-sized waste particles. Before throwing the dishes in the kitchen sink, gather all the left-over food and throw it in the trash can.
- Collect oily and greasy food products in a separate container and discard them separately. Do not throw any products down the drain.
Some drainage cleaner recommendations from the plumbing experts.
If you have already tried the above tips and they don’t seem to be working, it might be time to use a drain cleaner. Here are some safe and effective products that you can use:
- Baking soda and vinegar: This is a classic home remedy for clogged drains. Pour half a cup of baking soda down the drain, followed by half a cup of vinegar. Allow the mixture to sit for 15 minutes before running hot water down the drain.
- Plunger: This is a common tool that can be used to dislodge clogs. Make sure the plunger is big enough to cover the entire drain opening. Place the plunger over the drain and pump it up and down until the clog is removed.
- Drain snake: This is a long, flexible wire with a spiral tip that can be inserted into the drain to remove clogs. Feed the drain snake into the drain until you feel resistance. Once you hit the clog, twist the drain snake to break up the debris.
If you’ve tried all of these methods and the clog is still present, it’s time to call a professional for septic services in Lewis Center, OH.
